Chapter 1 – Introduction: How To Make Your Car Run On Water
Are you sick of paying more than $4 a gallon for gasoline only to see the prices continue to rise? Are you sick of lining the pockets of the billionaires in the oil game that rake in obscene salaries while people like you, and I suffer as we struggle to put enough gas in our cars to get to work each day? If so, maybe you, like many other people, would like to find a better way to fuel your car.
After all, where is it written that we have to use gasoline? Other products throughout the years have been tested but most tests of products have been halted because they infringe on the profits of the big money oil tycoons.
Naturally, with today’s gas prices, you are thinking about alternate ways to make your car run without the high cost of gasoline. You have probably also noticed that there are ads on the internet about making your car run on water and have most likely wondered “what’s that all about?” Can you really make your car run on water and if so, how?
Actually, automobile manufacturers are already experimenting with this possibility. Hydrogen operated cars are in the future for all of us. We already know the power of water as we watch water power in places like Hoover Dam. Imagine being able to allow the pressure of water build up and convert to hydrogen and oxygen, thus allowing your car to run? This is not some pipe dream but reality.
Why aren’t water operated cars already being used? They are being produced, just not yet introduced to the public. It took more than 20 years for the electric car to be introduced to the public. The electric car, such as the Smart Car of America, runs solely on electric energy and there is nearly a one-year waiting list for the car. Clearly, there is a need for Americans to run their cars on something other than gasoline.
What we do not realize is that gasoline is not a required fuel it is an alternative fuel that we use to get our cars to run. Gasoline and natural gas used to be cheap. It used to be the most inexpensive way to get a car to run and natural gas used to be the cheapest way to heat a house. What were other ways there to heat a house? Water. But for some reason, natural gas won. It was considered the cheaper alternatives.
Then environmentalists began to study the emissions the gasoline was making into the air and saw that it was really adding to pollution. People like to pick on environmentalists a lot. They like to call them “tree huggers” and other names. But in truth, if it wasn’t for these folks who are willing to stick their necks out to make sure we have clean air and water, we wouldn’t have clean air or water. Even those who do not consider themselves environmentalists can appreciate that.
So environmentalists began to make sure the emissions in the cars were not polluting the air as much. Ethanol is now used to add to gasoline so that it runs cleaner. Today, the price of oil is sky high. While years ago, most of our oil was drilled and produced by the United States, today we get most of it overseas. And the cost continues to rise. Countries that are rich in oil, like Saudi Arabia, are dripping in diamonds. Oil barons in Texas, Oklahoma and the heads of oil companies are making obscene amounts of money. Meanwhile, the rest of us are putting $5 into the car at a time because we find that $450 is too much to pay for gasoline.
The price of gasoline fluctuates. But it has continued to rise steadily since the 1970s. Since we began importing our oil, we have found that we are pretty much being blackmailed into paying whatever price is set by the overseas cartel. And as the price of oil has risen over the years, the value of the dollar has declined.
But this is not a history lesson about oil and how it has continued to rise in price, along with the cost of gasoline which is made from this oil. This is about beating the oil barons at their own game and still getting your car to run.
Anything can run on hydrogen and oxygen being burned, including an engine. If you convert water into hydrogen and oxygen, you can use water, ordinary tap water, as a fuel instead of gasoline in your car. Sounds too good to be true? Ford and Chevy are already experimenting with hydrogen operated cars. But, again, it will be years before they reach the public, and when they do, you can bet that there will be waiting list a mile long for those cars.
Meanwhile, you can use this guide as a way to actually convert your own car into a car that is run on water.
No longer do you have to be beholden to the oil companies for the power to drive your vehicle and get to work each day. No longer do you have to be grateful for a way to get a few bucks to fill up your tank. Now you can fill it with water and away you go.
Now, don’t start thinking that you can just fill up your tank with water and run the car – it doesn’t work like that. You have to convert your car and install a water tank, reaction chamber, gauges and a control circuit that has to be hooked up to your existing carburetor. This has to be done in order for you to get started making your car run on water.
If you follow the plans outlined in this book, you will not only be able to save on fuel, but you will be able to save the environment as well. Instead of burning harmful vapors, you will be burning hydrogen. The air will thank you and most of all, your pockets will thank you when you do not have to continually empty them at the gas station.
This book will not only talk about how to get your car to run on water and the process that you have to undergo to get the car to run on water, but how the many kits that you see online work and how they can work for you. You have probably seen the kits online that can make your car run on water and wondered how they work. There is a difference between those kits and what you will learn at the beginning of this book.
The kits that you buy online that allow your car to run on water are converting your car into a hybrid. A hybrid is a car that runs on gasoline and another product. In this case, it is water. Some of these kits work and some do not. We will include a chapter in this book as to how to ascertain the difference between the types of kits that work and those that do not. It is important to understand the difference between a hybrid and a car that runs strictly on water.
So, let’s get started. Here is a step by step guide on how you can make your car run on water.
Chapter 2 – Measuring Your Current Operating Temperature
First of all, it has been suggested that you try this on an older car. One that is not the family car. Whenever you are making repairs or modifications on a car for the first time, it is the wise thing to do not to do it on the family car.
So once you have found the perfect car to work on, the first thing you want to install is a CHT Gauge. This will measure the temperature that the current gasoline is running on. This is the gauge that you will need to make sure that your engine is not overheating. You need to install a new gauge because the gauge that you currently are using will not let you know that you are overheating as it is too slow. You can find a CHT which stands for cylinder head temperature) gauge in various places online.
If you cannot find a CHT gauge, you can also install an EGT gauge. This is an Exhaust Gas Temperature gauge. Either of these will protect your engine from overheating when you are running your car on water. Because the existing gauge that you have is too slow for this process, you need to install one of these two new gauges that fit right under your spark plug. Look for the cylinder head under the spark plug and remove the spark plug before installing the gauge. Then re-install the spark plug. You may want to clean them before reinstalling them as now is the perfect time to do this.
A water powered car, such as the one depicted in this book is not a steam engine, nor should it be confused with a steam engine. You are actually producing a hydrogen-oxygen car. There are other waters operated cars and kits online that are simpler to use as you only have to install a kit, but they do not work as well as this type of car.
If you have no mechanical knowledge of building a car or how an engine works, you can have someone who is a mechanic help you with some of the aspects of building this car. Installing the gauge is just one part of many that you will have to install as you build your car that runs on water.
Once the CHT or EGT gauge is installed and the spark plug replaced, you are ready for the next step in building your water operated car.